Two-component liquid polyurea resin for the rehabilitation of T and Y connection
During processing it is characterized by high levels of protection, even in the presence of humidity and low temperature.
Hardening at room temperature after mixing resin and hardener in the ratio 100: 60
At the end of hardening, a yellow compound will be obtained to be applied homogeneously to the felt.
| Final Colour | Yellow |
|---|---|
| Mixing ratio by weight | 100:60 |
| Usage time 25 ° | Min 38-48 |
| Hardening time 25 ° C | About 2-4 ore |
| Colour | Resin: yellow - Hardener: colorless |
| Viscosity at 25°C (g/Pas) | Resin: 700-1400 / Hardener: 2000-3000 |
| Density at 25°C (g/ml) | Resin: 1,06-1,14 / Hardener: 1,12-1,18 |
| Volume ratio | Resin: 100 - Hardener: 60 |
| Packaging | Drums |
| Permeability to water | No penetration |
| Duration of conservation | 1 year in tightly closed containers and in a cool and dry environment. Sensitive to humidity |
| Storage | tightly closed containers and in a cool and dry environment |
Resin for rehabilitation of T (90 °) and Y (45 °) connections
Combine component B with component A in a single container, taking care to remove all the contents.
Mix the two components in the right proportions avoiding to incorporate air, thus creating a homogeneous compound.
Spread evenly on the Liner
