Silicone bladder for the rehabilitation of Connections at 45 °.
It is a silicone air pocket to be installed on the Bladder holder using a metal clamp.
Installation pressure: 0.8 bar
Minimum dn of the main line: 70 mm
Minimum connection dn: 50 mm
We have 2 different types of Bladder:
Standard: when the Bladder does not need to traverse curves to reach the correct position
Flex: when the Bladder has to overcome one or more curves to arrive at the installation point.
Customizations on request
| Material | Silicone |
|---|---|
| Installation pressure | Advice 0,6/0,8 bar |
| Type | Standard: when it is not necessary that the Bladder has to go through curves to reach the correct position Flex : when the Bladder has to go through one or more curves to reach the installation point. |
| Minimum dn of the main line | 70 mm |
| Minimum connection dn | 50 mm |
| Bladder Lenght | Standard Lenght: 1350 mm/ 500 mm |
| Steam | Yes, up to 100°C |
Rehabilitation of Y-Connections 45 °
Fixing the Bladder on the Bladder Holder. Felt installation, resin felt impregnation. Positioning of the Bladder in correspondence with the sling thanks to the use of a semi-rigid probe equipped with a handlebar to push and rotate the Bladder in the correct position.
Inflation up to 0.8 bar.
