Skip to content

Plaster Day Night

Plaster Day Night is a two-component, solvent-free epoxy-polyamide putty

Plaster Day Night is a two-component, solvent-free epoxy-polyamide putty, self-priming, applicable by hand. To work with the aid of water.
To be used on all gravity pipes, manhole joints ..

It repairs practically any material: PVC, Lead, Copper, Polyethylene, Polypropylene, Iron, Ceramic …

Repair takes less than 1 hour:

  • Preparation about 5 min
  • Installation about 10 min
  • Drying and polymerization at 24 ° C: Touch dry 4 hours; Cured for 5 days

Day and Night putty is a simple alternative to traditional methods such as welding and sealing.

Grouting works on wet and dry pipes.

Mixed color two-component green DAY: yellow and two-component NIGHT: blue
Blending 1:1
Appearance Semilucid
Temperature resistance (to air) constant 110°C
occasional 125°C
Chemical resistance Salts Excellent
Chemical resistance Water Excellent
Dilution It must NOT be diluted
Dry thickness recommended In a single layer, from 3 to 5 mm. If required, thicknesses up to 15 mm can easily be applied
Pot life 60 minutes at 25 ° C
Lower at higher temperatures
Drying and polymerization at 24 ° C Touch dry: 4 hours
Curing: 5 days
Drying and polymerization immersed in water 13 ° C Touch dry: 10 hours
Curing: 10 days

Applications

Coating of gravity pipes
Coating of well junctions
External covering of piles of pontoons, in steel or concrete.
Compatible with fresh or salt sea water

Use

Remove all traces of oil or grease from the surfaces by rubbing with clean pads moistened with a suitable solvent or abrasive sandblasting.
Mix the two components (yellow base and blue hardener) before application until a homogeneous consistency of uniform green color is obtained.
Apply the product within 15 ‘and always keep it immersed in water.
Manual drafting.

Ecomondo 2023

07.11.2023 - 10.11.2023

C6 stand 107